You can use the BPALK alkaline battery pack to power your CR800, CR850, CR1000X, or CR3000 dataloggers, and their peripherals. You can also use it as a separate auxiliary 12 V power supply to power remotely located sensors or peripherals. The system must have a common ground.
The BPALK consists of eight replaceable D-cell alkaline batteries, battery connectors, and a temporary 12 V AA alkaline battery pack used during D cell replacement. The temporary battery pack requires eight AA-cell batteries (not included).
Read MoreAlkaline batteries are not rechargeable, and their Amp hour ratings decrease with temperature extremes. Alkaline batteries may leak when used outside the temperature range of -25° to +50°C, or when the battery voltage drops below 9.6 V.
Battery Type | Alkaline |
Nominal Rating | 7.5 Ah (@ 20°C) |
Batteries Needed | 8 not-rechargeable alkaline D cells (included) |
Output Voltage | 12 Vdc |
Operating Temperature Range | -25° to +50°C |
Dimensions |
|
Weight | 1.8 kg (4 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Compatible | Note | |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | ||
CR10X (retired) | ||
CR200X (retired) | ||
CR206X (retired) | ||
CR23X (retired) | ||
CR295X (retired) | ||
CR3000 (retired) | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) | ||
CR9000X (retired) |
A desiccated, non-condensing environment is required. The BPALK includes built-in keyhole flanges for mounting to the backplate of a Campbell Scientific enclosure.
Number of FAQs related to BPALK: 1
Contact Campbell Scientific for assistance. This procedure requires special tools.