Coaxial Cables / COAXRPSMA-L
COAXRPSMA-L LMR195 Antenna Cable with Reverse Polarity SMA and Type N Pin (Male) Connector

Overview

The COAXRPSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and a Reverse Polarity SMA (RPSMA) pin (male) connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.

Read More

Images

Detailed Description

The COAXRPSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and a Reverse Polarity SMA (RPSMA) pin (male) connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use.

The COAXRPSMA is recommended for cable lengths less than 10 ft. If the cable needs to be longer, the COAXNTN coaxial cable and a surge suppressor kit are recommended.

Specifications

Cable Type LMR195
Connector 1 Type N pin (male)
Connector 2 Reverse Polarity SMA (RPSMA) pin (male)
Bend Radius 1.27 cm (0.5 in.)
Operating Temperature Range -40° to +85°C
Impedance 50 ohm
Attenuation
  • 14.6 db/100 m (4.4 db/100 ft) @ 150 MHz
  • 25.5 db/100 m (7.8 db/100 ft) @ 450 MHz
  • 36.5 db/100 m (11.1 db/100 ft) @ 900 MHz
  • 62.4 db/100 m (19.0 db/100 ft) @ 2.4 GHz
Weight 0.03 kg/m (0.021 lb/ft)

Compatibility

The COAXPRSMA is compatible with any device requiring a Type N to RPSMA cable with an impedance of 50 ohm. The COAXRPSMA is often used with the NL240, CWB100, CR200-series, AVW200-series, CRVW3, and the following series of Campbell Scientific spread-spectrum radios: RF400, RF401, RF401A, RF407, RF412, RF422, and RF430.

Related Documents