Services Available | |
---|---|
Repair | No |
Calibration | No |
Free Support | No |
Although the CSBuoy-DT Water Quality Platform System was retired on January 5, 2010, some replacement parts remain available.
Campbell Scientific's CSBUOY-DT is a wireless, floating, self-contained package that allows fish farmers and water resource managers to monitor critical water quality parameters from the convenience of their office.
The CSBUOY-DT is not suitable for wave or tidal environments.
Read MoreThe CSBuoy-DT consists of a buoy, internal CR206 datalogger with 900 MHz spread spectrum radio, an antenna, a sealed rechargeable battery, a 5 Watt solar panel, dissolved oxygen sensor, agitator brush (to generate water flow past the sensor), and a temperature probe. The onboard transceiver sent data to an onshore base station or the manager's office. The internal data logger was preprogrammed to measure the connected sensors.
The buoy requires a minimal amount of setup and can be deployed anywhere on the pond. This self-contained package can be easily moved from pond to pond.
Polyethylene buoy houses:
Data Capacity | Stores 32,000 data points |
Buoy |
|
Environment | Freshwater and brackish ponds and small lakes; quiet water marine (no wave or tidal activity) |
Buoy Material | Polyethylene |
Instrument Housing Outer Diameter | 16.15 cm (6.36 in.) |
Instrument Housing Inner Diameter | 15.24 cm (6 in.) |
Float Diameter | 76 cm (30 in.) |
Height | 119 cm (47 in.) |
Weight | ~16.8 kg (~37 lb) |
Sensors |
|
Temperature Range | 0° to 50°C |
Accuracy | ±2% |
Response Time | 2 minutes to reach 90% of final reading |
Minimum Water Flow Rate | 5 cm (2 in.) per second across membrane |