Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Referencing variables via strings representations at runtime Gav 7
How to update the CR1000X card in DEV config benomar 3
How keep data table JhnRqlm 0
mV/V on cr1000X with excitation needs of 5 to 12V AEZatNHc 0
K&Z CNR4 - RnAs vs calculated net radiation HMNIBIO 0
AT commands modem on CR300 Benjamin.vial 3
The best solution to implement a measurement cycle with two parts. tomasafonso 3
MLX90614 i2c sensor to CR1000x Yuvash 3
4-20mA circuit issue Pscamm 2
Sending email and text messages Michael Lily 1
Remotely control power to CR6 logger --dd-- 3
KonectGDS MatiasFernandez1422 0
Problem communication between CR1000 and PC SangNguyen 3
Unable to access CR1000X due to failed program Daniwenz 7
How to read TTL output vk 4
PulsePort on CR6 using U ports Monte 3
Using USB to get data from a CR350 TaCaPica 4
Scheduled collection every X seconds and new filename every X hours gcauble 5
Conversion of Thies Station with (analogue) Sun, Wind, and Baro meassurements jonas 2
MQTT Publish Table with CR310 niko 1
TLS Handshake occurring for every MQTT Publish? jhurmence 4
Receiving and sending data from CR1000/X by ftp artyb 31
PC-TDR/TDR200 "NAN" for VWC? andrean 2
Skipped Scans using SDI-12 with CR6 at 1-Second Scan Interval dbrese_stone-env 7
Connection issues after uploading new program stb3 5
logging of seperate power rail cellectronic 3
Rush Scan (CR310) Nichol 3
SETVALUEEX request over https richaus 2
Forced to keep off-line","opening not permitted Abraim 8
Data synchronization between ATI-K sonic anemometer and LI7500A vk 8