Hi everyone,
Here is the problem : I have a CR23X connected to 3 muxes (AM16/32, AM416_1 and _2). I use PC400 to send the programs and monitor the data, and the connection PC-logger is made thanks to a SC-USB cable.
The set up works well (except that the sensors don't always give values..) and I can hear every channel being checked. I have been able to collect some data and to have it in real time.
Then, I left my desk for 20mn, the logger was still plugged on the power supply, but turned off. When I came back, impossible to connect to the logger. The SC-USB to CS I/O port, (in the COM port selection) was not there anymore. Same in my Device Manager, no more SC-USB in 'Other device', even in the hidden ones.
I have reinstalled the SC-USB drivers, reconnected the CR23X after, the port doesn't want to come back.
Nothing happened that can justify a SC-USB port disappearance in these 20 mn..
Any idea of what to do ?
Many thanks for your help,
A.