Hey guys.
I've tryed to make short cut program to read measurements of a WXT 520 weather station from vaisala's but it doesn't work.
Although the instrument is already into the short cut's library, the program generated shows NAN in all measurements that come from the station.
Anyone has any idea why this is happening?
Regards.
The file in ShortCut assumes the WXT520 and cable were purchased from Campbell Scientific. If you purchased the WXT520 direct from Vaisala, the configuration of the sensor will be different and the colors of the wires may also be different. You would need to read the Vaisala manual about how to change the settings. Double check your wiring.
Our manual for the WXT520 shows what settings we use for the sensor.
There are two videos on our website that help with troubleshooting SDI-12 sensors.
https://www.campbellsci.com/videos?show=&keywords=sdi-12