For remote systems or systems with large power requirements
Overview
The SP370-L 370 W Solar Panel is a photovoltaic power source capable of recharging batteries. It is used in systems that require high-power solar panels. The SP370-L allows unattended operation of systems in remote locations, far from ac electrical sources. The cable length for the solar panel is user-selectable.
For ease with mounting the solar panel to the mast and leg braces of a CM106B tripod, mounting hardware is available as an accessory item.
The SP370-L comes with 1 m (3.28 ft) of cable pre-attached that terminates with MC4 connectors. When ordering the solar panel, specify a cable length in feet that is in addition to the 1 m (3.28 ft) length of pre-attached cable. If you do not desire a longer cable, select "0" (zero) for the cable length, and a set of mating MC4 connectors will be included for you to make your own cable.
Images
Similar Products
Specifications
| Maximum Peak Power | 370 W |
| Current at Peak Ipmax | 9.69 A |
| Voltage at Peak Vpmax | 38.34 Vdc |
| Maximum Surface Load (wind/snow) |
|
| On-board Regulator Included | No |
| Dimensions | 1,795 x 990 x 38 mm (70.7 x 39.0 x 1.5 in.) |
| Weight | 19 kg (41.9 lb) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Mounting Equipment
| Compatible | Note | |
|---|---|---|
| CM106B | ||
| CM110 | Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B. | |
| CM115 | Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B. | |
| CM120 | Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B. | |
| QST6 | ||
| UT10 | The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized. | |
| UT30 | The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized. | |
| UT6 | The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized. | |
| UTHD | The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized. |
Additional Compatibility Information
The SP370-L is compatible with Concorde Sun Xtender series (such as BP84) or flooded batteries.