Videos & Tutorials Learn more about our products and how to use them
Configure a Campbell Scientific Water Sampler for 4 to 20 mA Input
Learn how to use the integrated keypad controller to configure a Campbell Scientific vacuum water sampler for a 4 to...
EZSetup Ethernet Connection
Use the EZSetup wizard to set up IP communication between the computer and datalogger.
Datalogger Ethernet Configuration
Use the Device Configuration Utility to enter the datalogger static IP Address, Subnet Mask, and IP Gateway address. (A static...
Connect | Manage Storage Devices with File Control
The File Control feature lets you manipulate files stored on the datalogger or external storage devices. Learn how to quickly...
Configuring a Campbell Scientific Water Sampler
Watch a demonstration of how to set the following: a start delay, time/day initiation, 15-minute interval time, and composite sample.
CR6-WIFI Datalogger | Setting up a Network
Instructions for how to create a Wi-Fi network "right out of the box" or join an existing Wi-Fi network.
Solar800 Station | Software Configuration
A demonstration of the simple software configuration of a Solar800 station for solar-resource assessment. This tutorial begins with unpacking the...
CRS451/CRS456 Sensors | Configuration
Step-by-step instructions for setting up a CRS451/CRS456 Water-Level Recording Sensor using the included HydroSci software.
LoggerNet Software | Network Planner
An exploration of LoggerNet's Network Planner tool, which automatically specifies the best hardware and software settings for a particular setup...
Learn more about CampbellCloud.