Distance up to 30 meters
Overview
As a non-contact, radar water-level sensor, you can use the RangeVue™️30 to monitor the water level of rivers, lakes, and reservoirs. With 80 GHz radar technology, the RangeVue 30 directly measures the distance between the sensor face and the water surface. This distance can be used to determine water level or stage. The sensor is ideal for areas where submersible sensors can be damaged due to corrosion, contamination, flood-related debris, or lightning.
Benefits and Features
- Non-contact water-level measurement
- Meets United States Geological Survey (USGS) Office of Surface Water (OSW) requirements for accuracy
- SDI-12 version 1.4 functionality
- Configurable over SDI-12
- Bluetooth-configurable over smartphone, tablet, or PC
Images
Aspen 10-Compatible IoT Solution
The RangeVue 15 or 30 can be paired with the Aspen™10 Internet of Things (IoT) Edge Device. To get next-gen IoT solutions for advanced water-level monitoring, click the image below:
Specifications
| Measurement Description | Distance |
| Output Options | SDI-12 |
| Measurement Range | 30 m (98.4 ft) |
| Accuracy | ±2 mm (±0.0065 ft) |
| Resolution | 1 mm (0.0033 ft) |
| Radar Frequency | W-band (80 GHz) |
| Beam Angle | 4° |
| Input Voltage | 8 to 30 Vdc |
| Current Drain | 10 mA (at 12 Vdc) |
| Operating Temperature Range | -40° to +80°C |
| Mechanical Rating | IP66/68 IEC 60529, Type 4X/6P UL 50 |
| Material | PVDF, FKM |
| Cable Termination | 4-Pin A-Coded M12 Connector |
| Threads | 1 NPT |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Data Loggers
| Compatible | Note | |
|---|---|---|
| Aspen10 | ||
| CR1000 (retired) | ||
| CR1000X | ||
| CR200X (retired) | ||
| CR295X (retired) | ||
| CR300 | ||
| CR3000 (retired) | ||
| CR310 | ||
| CR350 | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) |
Distributed Data Acquisition
| Compatible | Note | |
|---|---|---|
| GRANITE 6 |
Additional Compatibility Information
The RangeVue 30 interfaces using the SDI-12 communications protocol, and it is compatible with any SDI-12-compliant data recorder, including Campbell Scientific data loggers.